Reversing The Door Swing - GE GFDR485 Manual Del Propietario E Instalación

Ocultar thumbs Ver también para GFDR485:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
Instructions
REVERSING THE DOOR SWING (if desired}
IMPORTANT NOTES
, Read the instructions
all the way through
before
starting.
, Handle ports carefully to ovoid scratching
point.
, Set screws down by their related ports to ovoid
using them in the wrong places.
, Provide a non-scratching
work surface for
the doors.
, Normal completion
time to reverse the door swing
is 30-60 minutes.
IMPORTANT: Once you begin, do not move the
cabinet until door-swing
reversal is completed.
These instructions
are for changing
the hinges
from the right side to the left side-if
you ever want
to switch them back to the right side, follow these
some instructions
and reverse all references
to the left and right.
TOOLS YOU WILL NEED
O #2 Phillips-head
screwdriver
O T-25 torx driver
0 1/4" nut driver
DOOR PARTS
2-#8xl/2"Screws
6-#8xl/2"Screws
(striker plate)
(hinge assembly and
10 - #8 x 7/8" Screws
handle spacer)
(door assembly)
2 - Panel Plugs
/
i - Door Mask
2 - #8 x 1/2" Screws
(door mask)
2 - #10 x 5/8" Screws
(hinge)
2 - #10 x 5/8" Screws
(panel plug)
1 - Chrome Door Cover
1 - HandleSpacer
1 - Inner Door
Assembly
Assembly
1 - #8 x 3/8" Screws
(hinge pin)
BEFORE YOU START
Unplug the dryer from its electrical
outlet.
31

Publicidad

Tabla de contenido
loading

Tabla de contenido