GE GFDR485 Manual Del Propietario E Instalación página 42

Ocultar thumbs Ver también para GFDR485:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before you call for service...
PROBLEM
Possible Causes
What To Do
Small amount of water
Inadequate
load size for steam
. If using the Steam Dewrinkle cycle, manually reduce the
on floor in front of dryer
cycle selected, excess steam
cycle time. If using the Steam Refresh cycle, add more
condenses
inside cabinet and
garments to the loud.
leaks out
Water on floor in back
Loose water hose connection to
. Tighten connection.
of dryer
valve
Hose missing rubber washer at
. Install rubber washer provided with hose.
connection
with valve
Dryer makes water
Water valve is open filling steam
• This is normal.
noises
generator
Steam generator is dispensing
. This is normal.
steam into drum
Water drips from door
Steam condenses on inner door
. This is normal.
when opened after
a Steam Cycle
Cannot see steam at
Steam released at different
. This is normal.
beginning of cycle
times in the cycle
Cannot see steam at any
The steam nozzle might be
. Call 800.GE.CARES to order nozzle replacement kit
time during cycle
clogged with debris from your
WE2SH71 or to request a technician to replace this for you.
water supply
Garments still wrinkled
Too many garments
. Loud fewer garments; manually increase time.
after steam cycle
Dryer continues to
Ext Tumble was selected
. Ensure Ext Tumble option is not selected. For the
tumble after display
Steam Refresh cycle, Ext Tumble will automatically
says Complete
be turned on and cannot be turned off.
42

Publicidad

Tabla de contenido
loading

Tabla de contenido