Connecting The Water Supply Hose - LG WM20WV26 Manual Del Propietário

4.
Put the appliance on the anti-slip sheets.
5.
Ensure the appliance is level.
• Push or rock the top edges of the appliance
gently to make sure that the appliance does
not rock. If the appliance rocks, level the
appliance again.
NOTE
• (*) means that this feature varies depending
on the model purchased.
• Additional anti-slip sheets are available at LG
Service Centre.
• Do not attach the adhesive side (
sheets to the feet of the washing machine.
Connecting the Water Supply
Hose
Before connecting the water supply hose to the
water tap, check the hose type and then choose
the correct instruction.
Notes for Connection
• Water pressure must be between 0.1 MPa
and 1.0 MPa (1.0‒10.0 kgf/cm
water pressure is more than 1.0 MPa, a
decompression device should be installed.
• Do not overtighten the water supply hose.
• Periodically check the condition of the hose
and replace the hose if necessary.
Checking the Rubber Seal
Two rubber seals (
water inlet hoses. They are used for preventing
water leaks. Make sure the connection to taps is
sufficiently tight.
) of anti-slip
1
Connecting Hose to Water Tap
Screw - Type Hose to Tap with
Thread
Screw the hose connection to the water supply,
which has 3/4" threaded union.
). If the
2
15
INSTALLATION
) are supplied with the
1
EN