Smart Functions; Using Lg Smartthinq Application - LG WM20WV26 Manual Del Propietário

EN 32

SMART FUNCTIONS

SMART FUNCTIONS
Using LG SmartThinQ
Application
• For appliances with the
Things to check before using
LG SmartThinQ
1.
Check the distance between the appliance and
the wireless router (WLAN network).
• If the distance between the appliance and
the wireless router is too far, the signal
strength becomes weak. It may take a long
time to register or installation may fail.
2.
Turn off the Mobile data or
Cellular Data on your smartphone.
• For iPhones, turn data off by going to
Settings → Cellular → Cellular Data.
3.
Connect your smartphone to the wireless
router.
NOTE
• To verify the WLAN connection, check that Wi-
• The appliance supports 2.4 GHz WLAN
or logo
• LG SmartThinQ is not responsible for any
• If the appliance is having trouble connecting
• The WLAN connection may not connect or may
• The network connection may not work
• The surrounding wireless environment can
• The appliance cannot be registered due to
• If the firewall on your wireless router is
• The wireless network name (SSID) should be a
• Smartphone user interface (UI) may vary
• If the security protocol of the router is set
Fi icon on the control panel is lit.
networks only. To check your network
frequency, contact your Internet service
provider or refer to your wireless router
manual.
network connection problems or any faults,
malfunctions, or errors caused by network
connection.
to the WLAN network, it may be too far
from the router. Purchase a WLAN repeater
(range extender) to improve the WLAN signal
strength.
be interrupted because of the home network
environment.
properly depending on the Internet service
provider.
make the wireless network service run slowly.
problems with the wireless signal transmission.
Unplug the appliance and wait about a minute
before trying again.
enabled, disable the firewall or add an
exception to it.
combination of English letters and numbers.
(Do not use special characters.)
depending on the mobile operating system
(OS) and the manufacturer.
to WEP, you may fail to set up the network.
Please change it to other security protocols
(WPA2 is recommended) and register the
product again.