Ciclo Descargado (Download Cycle); Open Source Software Notice - LG WM20WV26 Manual Del Propietário

EN 34
SMART FUNCTIONS
To Disable
Inicio remoto (Remote Start):
When the Inicio remoto (Remote Start) is
activated, press and hold Inicio remoto (Remote
Start) button for 3 seconds.

Ciclo Descargado (Download Cycle)

Download new and special cycles that are not
included in the basic cycles on the appliance.
Appliances that have been successfully registered
can download a variety of specialty cycles specific
to the appliance.
Only one cycle can be stored on the appliance at
a time.
Once cycle download is completed in the
appliance, the product keeps the downloaded
cycle until a new cycle is downloaded.
Wireless LAN Module
Specifications
Model LCW-004
Frequency
2412~2472 MHz
Range
IEEE 802.11 b : 17.82 dBm
Output
IEEE 802.11 g : 17.72 dBm
Power (Max.)
IEEE 802.11 n : 16.61 dBm
Wireless function S/W version : V 1.0
For consideration of the user, this device should
be installed and operated with a minimum
distance of 20 cm between the device and the
body

Open Source Software Notice

Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained
in this product, please visit http://opensource.
lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright
notices are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost
of media, shipping, and handling) upon email
request to opensource@lge.com. This offer is
valid for a period of three years after our last
shipment of this product. This offer is valid to
anyone in receipt of this information.
The operation is subject to the following two
conditions:
(1) this device may not cause harmful
interference and
(2) this device must accept any interference
received,
including interference that may cause undesired
operation of the device.