EN
38
MAINTENANCE
NOTE
• Turn off the supply taps to the machine if the
washing machine is to be left for any length of
time (e.g. holiday), especially if there is no floor
drain (gully) in the immediate vicinity.
•
icon will be displayed on the control panel
when water is not entering the detergent
drawer.
Cleaning the Drain Pump Filter
The drain filter collects threads and small objects
left in the laundry. Check regularly that the
filter is clean to ensure smooth running of your
washing machine.
Allow the water to cool before cleaning the drain
pump filter, opening the door in an emergency or
perform a emergency evacuation.
1.
Unplug the washing machine.
2.
Open the cover cap and pull out the hose.
3.
Unscrew the drain plug (
water. Slowly unscrew the filter (
water and remove small objects.
4.
After cleaning, screw the pump filter and
insert the drain plug.
5.
Close the cover cap.
CAUTION
• Be careful when draining, as the water may be
hot.
• Run the drum cleaning program once a month
(or more often, as needed) to remove excess
detergent and other debris.
) and then drain
1
) to drain
2