Kit Assembly - Metra 95-7309 Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the appropriate spacer (see Legend) between
the radio housing and the radio brackets, aligning the
holes in the radio housing to the clips on the radio
brackets. (Figure A)
2. Slide the radio in the completed assembly, and then secure
using the screws supplied with the radio. (Figure B)
3. Locate the factory wiring harness and antenna connector
in the dash. Metra recommends using the proper mating
adapter from Metra or AXXESS. Re-connect the negative
battery terminal and test the radio for proper operation.
4. Reassemble the dash in reverse order of disassembly.
Legend
• For the Hyundai Sonata 1995-2001, Hyundai Tiburon
(with double DIN radio) 1997-2002, and the Hyundai
Santa Fe 2001-2006 vehicles, use the provided thick
spacers.
• For the Elantra (with double DIN radio) 1996-2000
vehicles, use the provided thin spacers.
• The spacers will need to be removed from the shipping bar.
METRA. The World's best kits.
Installation instructions for part 95-7309

Kit Assembly

(Figure A)
(Figure B)
™ metraonline.com
IMPORTANT
If you are having difficulties with the
installation of this product, please call our
Tech Support line at 1-800-253-TECH.
Before doing so, look over the instructions a
second time, and make sure the installation
was performed exactly as the instructions
are stated. Please have the vehicle apart
and ready to perform troubleshooting steps
before calling.
K
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
P
OWER