Kit Assembly; Din Radio Provision With Pocket - Metra 99-8209 Instrucciones De Instalación

Scion
Ocultar thumbs Ver también para 99-8209:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DIN radio provision with pocket

1. Slide the Mounting Brackets onto the
sides of the Radio Housing until the side
clips engage. (Figure A)
Note: Use Bracket Set 1 for xA, xB, and
tC. Use Bracket Set 2 for the 2008 xB
and xD.
2. For Bracket Set 1 cut and remove all
mounting tabs except the tabs being
used for your application. (Figure B)
Note: Tabs are marked xA, xB and tC.
For Bracket Set 2 skip to step 3.
3. Slide the DIN cage into the Radio
housing and secure by bending the
metal locking tabs outward. (Figure C)
4. Slide the aftermarket radio into the cage
until it snaps into place. (Figure D)
5. Locate the factory wiring harness in
the dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
6. Reassemble dash in reverse order
of disassembly.

Kit Assembly 99-8209

8
(Figure A)
Bracket Set 1
(Figure B)
(Figure C)
(Figure D)
side clips

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido