Kit Assembly; Din Head Unit Provision With Pocket - Metra 99-5809 Instrucciones De Instalación

DIN head unit provision
1. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs down. (Figure A)
2. Slide the after-market head unit into the
cage and secure.
3. Snap the trim plate into the
radio housing.
4. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
5. Reassemble dash in reverse order of
disassembly.

Kit Assembly 99-5809

with pocket
4
(Figure A)