Pontiac Trans Am/Firebird 1994-2002; Din Radio Provision; Kit Assembly; All Vehicles - Metra 99-3009 Instrucciones De Instalación

Dash Disassembly 99-3009
Pontiac Trans Am/Firebird
1994-2002
1. Unclip the radio trim bezel.
2. Remove (4) 7mm hex-head screws securing the
factory radio and disconnect the wiring.
3. Cut and remove all mounting tabs on the radio
housing EXCEPT tabs "C".
Continue to kit assembly
(Figure A)
"C"
(Figure B)

DIN radio provision:

1. Cut and remove the shaft supports from the
spacer* and radio housing.
2. Slide the DIN cage into the kit and secure by
bending the metal locking tabs down.
3. Slide the aftermarket radio into the cage
until secure.
(Figure A)
5

Kit Assembly 99-3009

All Vehicles

4. Locate the factory wiring harness in the dash. Metra
recommends using the proper mating adapter from
Metra or AXXESS. Re-connect the negative battery
terminal and test the radio for proper operation.
5. Reassemble dash in reverse order of disassembly.
*Optional when depth
is an issue