Kit Assembly - Metra 95-7623 Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the radio brackets to the
radio trim panel. (Figure A)
2. Slide the radio into the bracket/
trim panel assembly and secure
to the assembly using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.

Kit Assembly

(Figure A)
95-7623
(Figure B)
3