Dash Disassembly - Metra 95-8212 Instrucciones De Instalación

1. Remove the cover from the hazard
light switch, unclip the switch, and
then unplug and remove it.
(Figure A)
2. Unclip the panel above the radio
including the a/c vents and clock,
and then unplug and remove the
panel. (Figure B)
Note: Start pulling from the inside
of the hazard switch cavity.
3. Unclip and remove the panel
surrounding the shifter. (Figure C)
Continued on the next page

Dash Disassembly

(Figure A)
95-8212
(Figure B)
2
(Figure C)