Gima ECG80A Instrucciones De Uso página 33

33
In calibrating process
Please wait...
English Interface
Attention: The calibrating process is operated automatically without pressing
any button, and it will return after ending the calibrating.
6. Waveform-freezing:
Press to freeze the current ECG waveform displayed on the LCD in order
to preview. Press the
7.3 Shortcut setup menu:
Shortcut Set
Sensitivity
Switch Mode
Filter
Speed
Interfaccia Inglese
1. Short menu:
Press to enter this interface. Press
and the item just turning, then press
and then press
2. Contents explanation:
Sensitivity: 5mm/mV,10mm/mV,20mm/mV, these three types of sensitivities.
Switch Mode: MANU,AUTO, shows the two operation mode: Manual
and Automatic.
In the Auto mode, the instrument records the twelve patient cables
automatically, three seconds ECG signal each patient cable.
again to renew the operation.
10mm/mV
MANU
OFF
25mm/s
to return.
ENGLISH
Ending the Calibrating
OVER
English Interface
to choose the relevant items
button to set the information,