Metra 95-5820 Instrucciones De Instalación página 2

Table of Contents
Dash Disassembly ................................................................................................3
Kit Preparation ......................................................................................................4
Kit Assembly
– ISO DDIN radio provision .....................................................................................5
95-5820
Dash Disassembly
1. Unclip and remove the switch
panel to the right of the cigarette
lighter then remove the (1) 9/32"
screw exposed. (Figure A)
2. Remove the rubber pad at the top
of the radio trim panel then remove
the (2) 9/32" screws exposed.
(Figure B)
Continue on next page
2
(Figure A)
(Figure B)