Kit Assembly - Metra 95-5820 Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the appropriate left or right
radio bracket to the radio housing.
With the notch in the radio housing
on top, align the holes in the radio
housing with the radio bracket, and
then rotate inward. (Figure A)
2. Slide the radio into the completed
assembly and then secure it to
the assembly using the screws
supplied with the radio. (Figure B)
3. Cut and remove the top (2)
mounting legs. (Figure C)
4. Locate the factory wiring harness
and antenna connector in the dash.
Metra recommends using the
proper mating adapter from Metra
or AXXESS. Reconnect the negative
battery terminal and test the radio
for proper operation.
5. Reassemble the dash in reverse
order of disassembly.
95-5820

Kit Assembly

(Figure A)
(Figure B) (Figure C)
5
CUT HERE - TOP LEG ONLY
TOP LEG ONLY
CUT HERE
CUT
CUT