Dash Disassembly - Metra 95-5820 Instrucciones De Instalación

3. Unclip and pull the side panels containing the a/c vents
away from the radio trim panel. (Figure C)
Note: It is not necessary to remove the panels completely.
4. Unclip and remove the radio trim panel. (Figure D)
5. Unclip and remove the hazard/airbag switch assembly
from the factory radio trim panel. (Figure E)
(Figure C)

Dash Disassembly

6. Unclip and remove the cigarette lighter socket from the
radio trim panel. (Figure F)
7. Remove (4) Torx screws securing the factory climate
control to the radio trim panel. (Figure G)
8. Remove (4) 9/32" screws to remove the factory radio.
Continue to kit preparation
(Figure D)
95-5820
(Figure E)
3
(Figure F)
Factory radio trim panel, rear view
FACTORY RADIO TRIM PANEL-REAR VIEW
(Figure G)