Publicidad
Idiomas disponibles
Idiomas disponibles
which could lead to a build up of bad smells
and may even damage the pressure cooker.
1. Store the gasket in the lid.
2. Store the pot and the lid separately
7. Troubleshooting
Warning! As soon as uncontrolled steam
emerges, remove the pressure cooker from
the hob. The pressure cooker is not to be
used again until the error has been correct-
ed. Only a slight emergence of steam from
the pressure regulator 3 is normal.
What to do if:
Problem
Steam is escaping from
between the lid and the pot.
No steam is coming from the
pressure regulator.
Too much steam is coming
from the pressure regulator.
The lid does not open.
Possible cause
1. Pressure cooker not
closed correctly.
2. Gasket is dirty.
3. Gasket is broken/worn
away
1. Steam is escaping from
between the lid and the
pot.
2. Pressure regulator is
dirty.
3. Not enough liquid in the
pressure cooker.
4. Heat supply too low.
1. Heat supply too high.
2. Pressure regulator is
dirty.
There is too much pressure
in the pressure cooker.
Solution
1. Close the pressure cooker
again correctly.
2. Clean the gasket.
3. Replace the gasket (1 x
year).
1. Replace the gasket (1 x
year).
2. Clean the pressure regulator
(see section "Cleaning and
storing").
3. Slowly cool down the
pressure cooker and fill with
at least 0.25 l liquid.
4. Increase the heat supply
(turn the hob to a higher
setting).
1. Decrease the heat supply
(turn the hob to a lower
setting).
2. Clean the pressure regulator
(see section "Cleaning and
storing").
Follow the instructions in
section "Opening the pressure
cooker".
9
Publicidad
