10
.MAINTENANCE:
Use a piece of cloth with water or mild cleansing agent to wipe
the device and dry it immediately with a dry cloth.
Do not use detergent or any strong chemicals to clean the
device.
Disinfection - Use a piece of cloth with a dilution of neutral
detergent or soapsuds to wipe the surface of the cuff for 10
seconds.
Make sure the cuff is completely dry before using.
If any suggestion or service is requested, please consult your
local distributor.
Do not implement the maintenance procedures for device
during measurement.
Only trained technicians are allowed to repair and dissemble
the device, including software upgrades, patches and
maintenance.
*Note!
Water quality required for cleaning and disinfection: Tap water.
19