Delete Individual Program Lines (Delete); Delete All Program Lines (D. All) - ProMinent gamma/ L Instrucciones Suplementarias De Funcionamiento

Settings for the "Timer" function (SET-menu)
28
Place- Description
holder
nn No. Program line
mm minutes
sssss seconds
fff Stroke rate
kkkkk Batch size
yy,yy Factor
x No. Relay
ooo Switch status
zz No. Decelerator
Tab. 5: The placeholders in lower case in Fig. 1
When enabling a TIME event there is a special display sequence:
Information
events to be
enabled
every hour
every day
every day,
every weekday
every day, and
weekend
every week
every 2 weeks
Fig. 2: Special display sequence when enabling TIME events.
Explanation of the placeholders in lower case see Tab. 6
Example:
Placeholder Description
hh hours
mm minutes
www Weekday
d Week number
Tab. 6: The placeholders in lower case in Fig. 2
2.3

Delete individual program lines (DELETE)

Select the required program lines in accordance with the line number using the arrow keys. The program line
is cleared when is pressed. The timer software sorts the remaining previous program lines from the new
ones (control see section 2. 2).
2.4

Delete all program lines (D. ALL)

NOTICE
All program lines are cleared, if you confirm YES with the
Specification
(value range)
00 ... 81
00 ... 59
00001 ... 32767
000 ... f
00001 ... 32767
00.01 ... 99.99
1 ... 2
ON, OFF
00 ... 12
Cycle +Time
Specification
(value range)
00 ... 23
00 ... 59
MON, TUE, ... , SUN
1, 2
max
See Fig. 1
key!
ProMinent ®