Support Bracket Functional Test; Maintenance And Reuse - Gima SUPERVEGA EVO Manual De Istrucciones

Ocultar thumbs Ver también para SUPERVEGA EVO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

GB
Once the suction unit has been fitted in the support bracket, make sure that the charge is in progress by checking the
signal of the LCD screen on the front of the device as indicated in TAB. I and TAB. II.
The charge time of the internal battery (fully discharged) with support bracket must last about 6 hours (360 minutes) with the
device switched off (not running). Always charge the battery after each use. The continuous charge of the battery does not damage
the internal battery but allows maximum autonomy.

SUPPORT BRACKET FUNCTIONAL TEST

All test described here allow the user to check the efficiency of support, proper charging of the vacuum cleaner and / or the need
for intervention by the service technician. This check must be performed at least once a day, and always weekly.
Check the operation of the bracket (without suction unit) by repeatedly acting on the seal hook. The movement must
be free from obstructions.
Always make sure that the fixing screws are tightened correctly;
Fit the suction unit in the bracket as indicated in Chapter "Securing the SUPERVEGA EVO suction device";
Visually check (as per TAB II) the activation of the LCD screen.
In the event one or more phases fail, refer to the technical service.
Do not tamper with mechanical and/or electrical parts as this may affect the safety and efficiency of the device.
No electrical and/or mechanical part of the support bracket has been designed to be repaired by the manufacturer,
customer, and/or user. Always refer to the authorised technical service.

MAINTENANCE AND REUSE

Once the device has been fitted in the bracket, always make sure that, upon activation, the LCD screen confirms the charge in
progress of the internal battery.
When using emergency vehicles, always check the housing of the suction unit in the support bracket at the end of the intervention.
In case of accidents or collisions of the emergency vehicle, always request the authorised technical service to check the support
bracket and the suction unit.
28

Publicidad

Tabla de contenido
loading

Tabla de contenido