Termozeta LA GELATIERA Libro De Instrucciones página 17

- Insert the stirrer (3) into the motor unit.
- Take the cooling bowl (4) out of the freezer.
- Close the appliance by fitting the assembled
part (motor unit, lid and stirrer) into the cooling
bowl (4) and by rotating clockwise up to the
block.
- Connect the appliance to the socket and switch
the ice cream maker on by pressing the ON/
OFF switch (5).
WARNINg!
The ice cream maker must be switched on
BEFORE adding any ingredient, to prevent
the mixture from freezing immediately when
coming into contact with the internal parts of
the cooling bowl.
HOW TO USE IT
Please abide the following instructions to achieve the best results and to
keep your appliance in good working conditions.
- Switch the ice cream maker on and pour the ingredients slowly through
the opening of the cover.
We recommend switching the ice cream maker on before adding the
ingredients, to prevent them from being frozen when coming in contact
with the cooling bowl walls.
- The ingredients increase their volume during the working. Therefore,
make sure that the ingredients poured into the cooling bowl (4) do not
exceed the half of the bowl to prevent them from pouring out during the
working.
ENGLISH
Fig. 2
3
Fig. 3
4
Fig. 4
5