Safety And Intended Use - Mettler Toledo M200 Guía De Configuración Rápida

1

Safety and Intended Use

h
Note: The Quick Setup Guide is a brief operating instruction.
The M200 transmitter must only be installed, connected, commissioned, and maintained by
qualified specialists e.g. electrical technicians in full compliance with the instructions in this
Quick Setup Guide, the applicable norms and legal regulations.
The specialist must have read and understood this Quick Setup Guide and must follow the
instructions it contains. If you are unclear on anything in this Quick Setup Guide, you must
read the Operation Manual (supplied on CD-ROM). The Operation Manual provides detailed
information on the instrument.
The M200 transmitter should be operated only by personnel familiar with the transmitter and
who are qualified for such work.
Intended Use
The M200 is a 4-wire transmitter for analytical measurements with 4 (0) to 20 mA output
signal. The M200 is a multi-parameter transmitter for pH/ORP, conductivity, dissolved oxygen
and ozone measurement. It is available as 1-channel or 2-channel version and compatible
with easySense™ and ISM
The M200 transmitter is designed for use in the process industries, in non-hazardous areas.
M200 parameter fit guide
Parameter
pH/ORP
pH/pNa
Conductivity 2-e
Conductivity 4-e
Amp. Dissolved Oxygen ppm
Dissolved Ozone
sensors.
®
ISM
•
•
•
•
•
•
easySense
pH 31, pH 32, pH 33, pH 34, ORP 41
–
Cond 71, Cond 72, Cond 73
Cond 77
O 21
2
–
en
31