•
When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
2.4 Set the SDA
•
Press <MODE> once in SDA setting mode.
•
The date & 'SDA' goes flashing alternative.
•
Press <UP> or <DOWN> to set the Special Date.
•
Press < Timer> to ignore the year.
•
Press <M1/6-M5/10> to select the number of SDA
•
Press <MODE> once to confirm the current setting and go to set the automatic update ON/OFF.
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
In case of ignore the year the SDA will be active ever year at same date
2.5 Switching automatic update ON/OFF
•
Press <MODE> once in automatic update setting mode.
•
The display show 'UPDATE' press <UP> or <DOWN> to switch update ON or OFF.
•
The indicator "
•
The indicator "
•
Press <MODE> once to confirm the current setting and go to set the dimmer ON/OFF.
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
2.6 Switching dimmer ON/OFF
•
Press <MODE> once in the dimmer on/off setting mode.
•
The display shows 'DIM ON' or 'DIM OFF'.
•
Press <UP> or <DOWN> to switch dimmer ON or OFF.
•
When display show 'DIM ON' ,press any key the back-light will brightest for 10 seconds.
•
When display show 'DIM OFF' the display will brightest for all time.
•
Press <MODE> once to confirm the current setting and it switches to auto-run mode.
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
" disappears, the update function is switch OFF.
" flashes. The time will be updated the next RDS time signal is received.
Instruction manual / UR2025
P4 of P8