2.7 12/24 hours mode
•
Press <MODE> once in the 12/24 hours setting mode.
•
The default is setting 24 hours
•
Press <UP> or <DOWN> to switch 24 or 12.
•
Press once to change 12 hour and "12" goes solid.
•
Press <Mode> once to confirm the current setting and it switches to Auto-run mode.
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
2.8 The Cooking Timer (Radio Off)
•
Press <TIMER> to enter the timer mode.
•
Press <M1/6> once, display shows '0:05 T1' goes solid or the previous value of the memory-1 goes
solid in the LCD.
•
Similar to <M1/6>, press <M2/7>, <M3/8>, <M4/9> or <M5/10> to select the desired preset memory
value.
•
Press <UP> or <DOWN> to adjust the value (from 1 minute to 23hours and 59minute), press
<TIMER> to start the cooking timer and the current value will store in to memory automatically.
•
Press < TIMER > again to pause the timer. To restart the timer press <TIMER> again.
•
Press and hold <TIMER> for 2 seconds to terminate the timer and leave, when the timer is running.
•
When the clock before 30 second reach to 00.00, the voice "be...be...be...be...be" will be heard until
00.00
•
When the clock reach to 00:00, the voice "be------" will be heard until user
•
Press the < TIMER > to terminate the timer and leave.
As the alarm becomes active, the cooking timer, if exists, is terminated immediately.
2.9 ALARM1 and ALARM2 setting
•
Press <ALARM1> or <ALARM2> once, 'ALARM1' or 'ALARM2' goes solid in the alphanumeric
section.
•
The current setting of HH:MM and the type of alarm goes flashing by the corresponding day-flags.
•
Press <UP> to advance the setting by 1 minute.
•
Press <DOWN> to move the setting back by 1 minute.
•
Press and hold <UP> or <DOWN> to change the setting in fast mode of 10 minutes per step.
•
Press <ALARM MODE> to change the type of alarm between daily, weekday, weekend and daily
independently, which are reflected by the 7 day-flags.
•
Press and hold <ALARM MODE> to enter daily independently mode. Press <ALARM MODE> again
to select the day and it will reflect by the day-flags. Press and hold <ALARM MODE> to leave the
daily independently mode and return select daily, weekday and weekend.
•
Press same alarm key, which is <ALARM1> or <ALARM2>, once to select the output format of the
alarm
Instruction manual / UR2025
terminate.
P5 of P8