Radio Reception - SOUNDMASTER Highline UR2025 Manual De Instrucciones

Output format
Beep sound
Radio output
Disable
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the system goes back to auto-run mode.
2.10 When SDA is active
•
When the date/month/(year) matches with the SDA which has been enable, alert becomes active at
8:00AM.
•
As the SDA active, Sound of beep toggles at the Speaker for 10 minutes, Muted Radio even radio
ON & The "SDA" goes flash on LCD display.
•
The 10 minutes beep music per every hour until 23:00.
•
Press any key to start its corresponding function and the SDA at the day will be terminate.
2.11 When alarm is active
•
When the real time clock matches with the alarm which has been enabled, alarm becomes active.
•
As the alarm becomes active, the Cooking timer, if exists, is terminated immediately.
•
If Beep sound alarm is selected,
1)
Sound of beep toggles at the Speaker
2)
Muted Radio even radio ON
3) The duration of alarm is 10 minutes
•
If Radio alarm is selected,
RADIO ON
1)
the duration of the alarm is 60 minutes
2)
•
Any key to terminate the currently active alarm

2.12 Radio reception

•
Press <POWER> once, the station frequency or the station name show on LCD.
•
If RDS information is transmitted by the station current set, "
after short time the station name appears in place of the frequency.
2.13 Recall radio preset memory
•
There are 10 preset memory stations for the radio.
•
When the radio is ON, press <M1/M6> once. 'MEM' goes solid; the frequency of the memory-1 goes
solid in the LCD. Press again <M1/M6> to select the preset memory-6.
•
Similar to <M1/M6>, press <M2/M7>, <M3/M8>, <M4/M9> or <M5/M10> to select the desired preset
memory station.
•
When new preset memory key is pressed, MUTE is active. When keying the preset memory has been
released for 1 second, the selection of preset memory is considered as valid and the radio will be
tuned to that frequency immediately with MUTE idle.
•
At any time, press other key to start its corresponding function.
LCD display
'Bell' symbol goes solid
'Radio' symbol goes solid
All the 'Bell' and 'Radio' are cleared
Instruction manual / UR2025
" appears in the display and
P6 of P8