Replacing The Transfer Roll - Xerox Phaser 5335 Guía De Instalación Del Kit De Mantenimiento

5. Hold the fuser unit by the tabs on both
sides and gently remove it from the printer.
6. Insert the new fuser unit into the printer.
Push down the levers on both sides to
secure the fuser unit to the printer.

Replacing the Transfer Roll

1. Push up the tabs of the clips on both sides
of the transfer roll and remove the clips.
2. Remove the transfer roll from the printer.
3. Install the new transfer roll to the printer.
Important
• Make sure to install the transfer roll with the gear on
the left.
3