Replacing The Retard Roll Assy For Tray 1 (Bypass Tray) - Xerox Phaser 5335 Guía De Instalación Del Kit De Mantenimiento

Ocultar thumbs Ver también para Phaser 5335:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

9.
Slide the white part towards the feed roll.
Slide it to the left until the tab on its right
side is inserted into the indentation on the
shaft.
10. Reinstall the roll cover.
11. Close Tray 1 and the upper cover.

Replacing the Retard Roll Assy for Tray 1 (Bypass Tray)

1.
Pull the front cover release levers on both
sides of the printer towards you and open
the front cover.
2.
Open the top cover.
6

Publicidad

Tabla de contenido
loading

Tabla de contenido