Specifications:
Displays:
Backlight:
Polarity:
Overrange:
Zero:
Display (Measure) Rate: Display updates 2 times per second, nominal.
Auto Power Off:
Battery Life:
Low Battery Indication: The "
Power Supply:
Accuracy:
Temperature
Coefficient:
Altitude:
Operating Environment: 32°F to 122°F (0°C to 50°C) at < 70% R.H.
Display Environment:
Storage Environment: -4°F to 140°F (-20°C to 60°C) at < 80% R.H. without battery
Jaw Opening:
Dimensions:
Weight:
Accessories included: Carrying Case, Test Leads with alligator clip, (1) 9V battery,
Safety:
Double Insulation
Instrument has been evaluated and complies with insulation category IV (overvoltage category IV).
Pollution degree 2 in accordance with IEC-644. Indoor use.
4 digit LCD with 9999 counts for both displays with 41 segment
analog bar graph on front display
Green illumination with auto-off after 3 minutes
Automatic, positive implied, negative (-) polarity indication.
"OL" indication is displayed.
Automatic
After 30 minutes of non-use.
100 hours continuous with Alkaline
" appears in the display with insufficient voltage for about
one hour. Then "bAtt" displays for 5 seconds and unit powers down.
Indicator duration varies by battery brand.
(1) 9V battery (NEDA 1604, JIS 006P, IEC 6F22)
With an isolated battery compartment.
Stated accuracy at 23°C ±5°C, <75% R.H.
0.1 x (specified accuracy) per °C,
(0°C to 18°C, 28°C to 50°C).
6561.7 ft. (2000m)
-4°F to 158°F (-20°C to +70°C)
61-763/ 61-765 accepts a 1.42" (36mm) conductor
61-773/61-775 accepts a 2.0" (51mm) conductor
61-763/61-765: 8.7"H x 3.1"W x 1.8"D (222mmH x 80mmW x 45.5mmD)
61-773/61-775: 10.6"H x 4.1"W x 1.9"D (270mmH x 103mmW x 48.5mmD)
61-763/61-765: 12.3 oz. (350g) including battery
61-773/61-775: 1.1 lbs. (500g) including battery
operating instructions.
Safety: Complies with (UL61010-1) (Second Edition),
IEC 61010-2-032, IEC 61010-031. EN61010-1, EN61010-2-032,
EN61010-031 specifications, CAN/CSA C22.2 no. 1010.1-92 and
CAN/CSA C22.2 No. 1010.2.032-96 Cat IV-600V/Cat III-1000V.
N12966
10