Tabla de contenido
Publicidad
EN
Disclaimer
Please read this entire document and all safe and lawful practices DJI
provided carefully before use. Failure to read and follow instructions and
warnings may result in serious injury to yourself or others, damage to your
DJI product, or damage to other objects in the vicinity. By using this product,
you hereby signify that you have read this disclaimer and warning carefully
and that you understand and agree to abide by the terms and conditions
herein. You agree that you are solely responsible for your own conduct
while using this product, and for any consequences thereof. DJI accepts
no liability for damage, injury or any legal responsibility incurred directly or
indirectly from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as "DJI")
and its affiliated companies. Names of products, brands, etc., appearing in
this document are trademarks or registered trademarks of their respective
owner companies. This product and document are copyrighted by DJI with
all rights reserved. No part of this product or document shall be reproduced
in any form without the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at
the sole discretion of DJI. For up to date product information, visit http://www.
dji.com and click on the product page for this product.
This disclaimer is available in various languages. In the event of divergence
among different versions, the English version shall prevail.
Warnings
1. The Charging Hub is only compatible with the DJI FPV AC Power
Adapter. DO NOT attempt to use the Charging Hub with any other
battery charger.
2. The Charging Hub is only compatible with BWX170-2000-22.2 Intelligent
Flight Batteries. DO NOT attempt to use the Charging Hub with other
battery models.
3. Place the Charging Hub on a flat and stable surface when in use. Make
sure the device is properly insulated to prevent fire hazards.
4. DO NOT attempt to touch the metal terminals on the Charging Hub.
5. Clean the metal terminals with a clean, dry cloth if there is any
noticeable buildup.
Introduction
The DJI FPV Battery Charging Hub is designed for use with the DJI FPV
Intelligent Flight Battery. When used with the DJI FPV AC Power Adapter,
it can charge up to three Intelligent Flight Batteries in sequence according
to their power levels, from high to low. The charging time for one battery is
approximately 55 minutes.
Usage
1. Connect the DJI FPV AC Power Adapter to a power outlet (100-240 V,
50/60 Hz) and connect the Charging Hub to the DJI FPV Battery Charger.
2. Insert the Intelligent Flight Battery into the battery port to begin charging.
The Intelligent Flight Battery with the highest power level will be charged
first and the rest in sequence according to their power levels. Refer to the
Status LED Indicator Descriptions section for more information about the
blinking patterns of Status LED indicator. The Intelligent Flight Battery can
be disconnected from the Charging Hub when charging is complete.
Status LED Indicator Descriptions
Blinking Pattern
Solid yellow
Pulses green
Solid green
Blinks yellow
2
Descriptions
No battery attached
Charging
All batteries fully charged
Temperature of batteries too low or too high (no
further operation needed)
TM
Publicidad
Tabla de contenido
