Camera Modes - Metz SCA 3402 M10 Manual Del Usuario

We recommend to study the complete
instructions of this SCA adapter in order to be
able to fully exploit all further capabilities of
your flash unit and SCA adapter. Please also
refer to the flash mode descriptions given in
your camera's manual.!

4. Camera modes

Program mode „P" and Vari Programs:
The camera preselects a shutter speed/aperture
combination in conformity with the adjusted pro-
gram. The shutter speed selected by the camera
lies between 1/60 sec. and 1/250 sec. depending
on the camera type and the prevailing ambient
light situation (for the sync speed range please
refer to the camera's operating instructions). Shut-
ter speeds faster than the flash sync speed are not
set by the camera. TTL flash exposure and TTL fill-
in flash are automatically controlled by the camera.
Camera mode "S" (shutter priority)
In the camera mode „S", any shutter speed can be
preselected on the camera. If the selected shutter
speed is faster than the flash sync speed then the
camera will automaticlly change over to flash sync
speed when the shutter release is touched (see
operating instructions of the camera). If the selec-
ted shutter speed is slower than the flash sync
speed, then this shutter speed will be retained.
Depending on the specific camera type a warning
signal may light up in the camera viewfinder when
the camera's shutter speed/aperture setting range
is exceeded (see operating instructions of the
camera).
10