Manual Ttl Flash Exposure Correction; (Flash-Override) - Metz SCA 3402 M10 Manual Del Usuario

5.3 TTL flash bracketing „Fb"
Flash bracketing can be performed with the meca-
blitz 54 MZ-..., 70 MZ-5 and 76 MZ-5 in the
"TTL" and "A" modes.
A flash bracketing series consists of three succes-
sive flash shots with different flash exposure cor-
rection values.
Flash bracketing sequence:
The first picture is shot without a correction factor.
No correction value is given on the display. When
the first shot has been taken the display changes
to „Fb 2". Additionally, "EV" and the minus correc-
tion factor for the second picture are indicated.
After the second shot, the display changes to
"Fb 3" and additionally indicates "EV" and the plus
correction factor for the third exposure. The flash
bracketing function is automatically cancelled after
the third shot and, if required, must be reactivated
for a new flash bracketing sequence.
To abort flash bracketing before the complete
series has elapsed, switch the flash unit off
and on again. In the TTL flash mode, flash
bracketing can only be performed if the
camera supports a flash exposure correction
on the flash unit. See camera instruction
manual! The maximum flash range indication
of the flash unit may vary and be adjusted to
the individual correction value.
16