Metz SCA 3402 M10 Manual Del Usuario página 13

mecablitz 54 MZ-4i
• For the i-TTL-flash mode press the "Mode" but-
ton repeatedly on the flash unit until "TTL" flas-
hes in the display.
• For the i-TTL BL flash mode turn the setting disk
while "TTL" is flashing until
flash mode is also shown. To deactivate the BL or
3-D function, turn the setting disk until the sym-
bol disappears. Push the setting disk in the
direction of the arrow to save. Saving will occur
automatically after 5s if the setting disk is not
pressed. After saving the symbol "TTL" will stop
flashing.
For system-inherent reasons the flash mode
with secondary reflector is not supported by
the 54 MZ-... in i-TTL-flash mode. Depen-
ding on the camera type, the triggering of the
camera will be blocked if a second reflector
is activated.
mecablitz 70 MZ-...
i-TTL-flash mode and i-TTL BL flash mode
are supported by mecablitz 70 MZ-5 from
series no. 28501!
• For the i-TTL-flash mode press "Mode" repea-
tedly on the flash unit until "TTL" flashes in the
display.
• For the i-TTL BL flash mode turn the setting disk
while "TTL" is flashing until
flash mode is also shown. Turn the setting disk
until the symbol
BL or 3D function.
Push the setting disk in the direction of the arrow
disappears to deactivate the
for the i-TTL BL
for the i-TTL BL
13