CYLINDER DOOR STRIKE
Refer to Figure 19.
The door strike must be adjusted to have sufficient
tension to hold loading door closed against force of load
tumbling against it. Proper adjustment is when 8 to 15
DOOR
pounds (35.6 N - 66.7 N) pull is required to open door.
STRIKE
If adjustment is required proceed as follows:
To adjust, open door, loosen jamnut and turn door strike
screw in or out as required. Retighten jamnut.
ACORN
NUT
DOOR
LATCH
T048IE1A
Figure 19
44
70369801