Storing The Trimmer After Use; Repair Service; Waste Disposal And Environmental Protection; Warranty - Solo 168 A Manual Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
As soon as the hedge trimmer is switched off, the sharp
cutting blades will stop - due to safety reasons - exactly
under the cover rail in order to reduce the risk of injuries
during transport.
4) Impact protector (Fig. 11)
The extended guide rail prevents unpleasant shocks
(blade recoil) being transmitted to the operator due to
impact with solid objects (wall, ground etc.).
5) Gear protection feature
If solid objecst are caught in the cutting blade and jam
the motor, switch off the machine at once, disconnect the
power plug from the power socket, remove the object
and continue with the work.
The equipment is also fi tted with an overload cutout,
which protects the gears against mechanical damage in
the event of blade jams.

14. Storing the trimmer after use

The hedge shears must be stored such that there is
no danger of injuries being caused to persons by the
cutting blades!
Important note: The shearing blades should be cleaned
after each use.(see also Section Maintenance).This will
considerably increase the service life of the device. Please
use a lubricator that is not harmful to the environ-ment ,
e. g. our service spray. Then put the shears in their case
with the cutting blades fi rst.

15. Repair service

Repairs to electric power tools should only be carried out
by specialist electrical personnnel.

16. Waste disposal and environmental protection

If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but
dispose of it in an environmentally friendly manner.
Please dispose of the device itself at an according col-
lecting/recycling point. By doing so, plastic and metal
parts can be separated and recycled. Information con-
cerning the disposal of materials and devices are avail-
able from your local administration.

17. Warranty

For this electric tool, the company provides the end user
- independently from the retailer's obligations
resulting from the purchasing contract - with the following
warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by
the original purchasing document. For commercial use
and use for rent, the warranty period is reduced to
12 months. Wearing parts and defects caused by the
use of not fi tting accessories, repair with parts that are
no original parts of the manufacturer, use of force, stro-
kes and breaking as well as mischievous overloading
of the motor are excluded from this warranty. Warranty
replacement does only include defective parts,
not complete devices. Warranty repair shall exclusively
be carried out by authorized service partners or by
the company's customer service. In the case of any
intervention of not authorized personnel, the warranty
will be held void.
GB-7

Publicidad

Tabla de contenido
loading

Tabla de contenido