Lcd Panel - Tripp-Lite SmartOnline SVT Serie Manual Del Propietário

4. Operation

LCD Panel:

Display Function
Backup Time Information
Shows the battery discharge time.
H: hours, M: minutes, S: seconds
Fault Information
A warning or fault has occurred.
Displays the fault codes. Codes are listed in
further detail in Section 3.9.
Alarm Status
The UPS alarm is disabled.
Output & Battery Voltage Information
Shows the output voltage, frequency or
battery voltage.
VAC: output voltage, VDC: battery voltage,
Hz: frequency
Load Information
Shows load level by 0-25%, 26-50%,
51-75% and 76-100%.
Overload.
The load or output is shorted.
Display Function
Mode Operation Information
The UPS is connected to the mains (utility)
power.
The battery is working.
The bypass circuit is working.
ECO mode is enabled.
The inverter circuit is working.
Power output is working.
Battery Information
Shows battery capacity by 0-25%, 26-50%,
51-75% and 76-100%.
Battery is not connected.
Indicates low battery level and low battery
voltage.
Input & Battery Voltage Information
Displays input voltage, frequency or battery
voltage.
VAC: input voltage, VDC: battery voltage,
Hz: input frequency
12