Maintenance: Cleaning The Sensor; Storage Condition; Ec Declaration Of Conformity - Mettler Toledo InPro 8000 Serie Guía De Configuración Rápida

InPro 8000 Series
malfunction, the equipment in which the sensor is installed,
needs to be in a safe condition (depressurized, empty, rinse,
vent, etc.).
6

Maintenance: Cleaning the sensor

Dirty or contaminated sensors can deliver incorrect mea-
surement values. If fouling is presumed, the sensor is to be
removed and cleaned. Suitable cleaning solutions are mild
detergents or strongly diluted acids (< 0.5% by weight) such
as hydrochloric acid.
7 Disposal
Disposal is to be carried out by the user in line with valid
local regulations. The user must either deliver the sensor to
an authorized private or public collection undertaking, or
dispose of it himself in accordance with the regulations for
such items / materials.
8 Warranty
On manufacturing defects, 12 months after delivery.
9

Storage condition

Inspect the instrument immediately after receiving for any
transport damage. The sensor should be stored in a dry,
clean and protected area until the time of installation. If the
sensor has been removed from the process, it should be
thoroughly cleaned and dried. It should be stored in a dry,
clean and protected area until time of installation.

10 EC Declaration of Conformity

The complete declaration is available in the declaration of
conformity certificate.
InPro, InFit, InTrac and CaliCap are registered trademarks of
Mettler-Toledo GmbH in Switzer l and, the USA, the European Union
and a further five countries.
Viton and Kalrez are registered trademarks of DuPont Performance
Elastomers LLC.
All other trademarks are the property of their respective holders.
© 07 / 2019 Mettler-Toledo GmbH
Printed in Switzerland
13
InPro 8000 Series
30 313 267 B
en