Maintenance And Repair; Disposal - Franke CRYSTAL FMW 45 CR C Manual Del Usuario Y De Instalación

EN

MAINTENANCE AND REPAIR

You may resolve certain little problems yourself:
The oven is not heating
X X
Check that the oven is correctly connected
and that your installation's fuse is not out
of service.
X X
Check that the oven is not set to demo
mode (see settings menu).
The oven light is not working
X X
Replace the bulb or the fuse.
X X
Check that the oven is correctly
connected.
X X
If the oven light still doesn't work contact
the After Sales Department or a qualified
professional accredited to work on the
brand.
The cooling fan continues to operate after
the oven stops

DISPOSAL

The symbol on the product or on the
packaging indicates that the device
must not be disposed of in the
domestic waste.
By disposing of the device in a proper way
you help to avoid harmful consequences to
environment and health.
Further information about recycling the device
is available from the competent authority, the
local refuse disposal service or the vendor of
the device.
Z X
Dispose of the device, which is to be
discarded, via a specialised waste collection
point for electronic and electrical devices.
In accordance with the Directive 2012/19/
EU, regarding the reduction of the hazardous
substances used in electrical and electronic
appliances, and waste disposal.
FMW 45 CR C XS / FMW 45 CR C BK
This is normal; the fan may continue running
until a maximum of 1 hour after cooking to lower
the temperature inside and outside the oven.
X
Z
Z
X
–
–
–
This information is given on the data plate.
The barred dustbin symbol on the appliance
indicates that at the end of its working life the
product must not be disposed of as household
waste.
Consequently, when the appliance has reached
the end of its working life the user must take
it to a suitable recycling centre for electronic
and electrotechnical waste, or return it to the
dealer when purchasing a new appliance of
equivalent type.
Proper separate waste collection of the
scrapped appliance for subsequent recycling,
treatment and environmentally-friendly
disposal helps prevent a potentially negative
impact on the environment and health and
facilitates recycling of the materials used in
appliance construction.
– 16 –
X
If the fan runs for over an hour, contact the
After Sales Department.
X
Make sure that maintenance on electrical
components is carried out only by the
manufacturer or the customer service.
X
Make sure that damaged cables are
changed only by the manufacturer or the
customer service.
X
When contacting the customer service,
please provide the following information:
type of fault
appliance model (Art.)
serial number (S.N.)