Important - Astralpool Selwatch Manual De Instalación Y Utilizacion

IMPORTANT

This device is not designed to be used by
people (including children) with reduced phy-
sical, sensorial or mental abilities, or by people
lacking requisite knowledge or experience, ex-
cept if a third party responsible for their safety
is on hand to oversee or instruct them in the
use of the device (NF EN 60335-1/A1)
Your device is near the end of its life.
If you wish to get rid of it or replace it, do not
throw it in the rubbish bin or into your local
council's recycle bins.
This symbol, displayed on a new device, signi-
fies that the equipment should not be thrown
away, but will be collected with a view to
its reuse or recycling. Any substances it
contains that may be dangerous to the
environment will be eliminated or neutra-
lised.
• You can give it to a charity or community orga-
nisation, which may repair it and put it back into
circulation.
If you have bought a new one, you can leave the
•
old one in the shop or ask the delivery person to
take it away with them. This is called a «one for
one» exchange.
Otherwise, take it to a waste disposal centre, if
•
your local council has set up a selective collec-
tion of these products.
The "CE" conformity mark certifies conformity
with directive 2004/108/CE relating to electroma-
gnetic compatibility, and directive 2006/95/
CE relating to the safety requirements of
electrical equipment.
"This device conforms to the NF C 15.100
standard (2002 Edition) and was made in
FRANCE by PACIFIC INDUSTRIE."
Characteristics of the A3-01 and A3-03 models:
Class 2 - 230 V - 50/60 Hz – IP45 Operating
temperature: 0°C to 50°C.
Your device must be installed according
to the instructions contained in this manual.
Please contact your dealer for more infor-
mation.
15
1 - Presentation of the models
Before installation, identify your model
from the ones presented below.
1. - Selwatch
( T
1
ype
The Selwatch allows one to use colorimetry to
measure and manage the amount of chlorine
produced by either an external electrolyser, or
by an external liquid chlorine injection pump.
1. - Selwatch +
2
The Selwatch + is an electrolyser that is regulated
by colorimetric analysis. It works to maintain an
exact and constant chlorine content in your swim-
ming pool.
1. - Selwatch pH
3
The Selwatch H measures and regulates the pH:
p
the pH+ or the pH- ( T
•
the pH+ and the pH- ( T
•
3-01 )
( T 3-03 )
ype
There is also
an injection
model
( T 3-02 )
ype
( T 3-09 )
3-08
ype eT
3-08 )
ype
3-09 )
ype