Craftsman 247.88790 Manual Del Operador página 3

1.KEEPAWAYFROMROTATING IMPELLER
ANDAUGER.CONTACT WITHIMPELLER O R
AUGER CAN AMPUTATE HANDS ANDFEET,
2. USECLEAN-OUT T OOLTOUNCLOG
DISCHARGE C HUTE.
3. DISENGAGE CLUTCH LEVERS, STOP ENGINE,
ANDREMAIN BEHIND HANDLES U NTILALL
MOVINGPARTS HAVESTOPPED BEFORE
UNCLOGGING OR SERVICING MACHINE,
4. TO AVOIDTHROWNOBJECTS INJURIES,
NEVER DIRECT D ISCHARGE ATBYSTANDERS.
USEEXTRA CAUTION W HEN OPERATING ON
GRAVEL SURFACES.
5. READOPERATOR'SMANUAL.
This symbol points out
importantsafety instructions
which, if not followed,could
endangerthe personal safety
and/or property of yourself
and others. Read and follow
all instructionsin this manual
beforeattemptingto operate
this machine.Failureto com-
ply with these instructions
may result in personalinjury.
When you see this symbol.
HEED ITS WARNING!
Your Responsibility
Restrict the use of this
power machine to persons
who read, understandand
follow the warnings and
instructions in this manual
and on the machine.
A chute cleamout tool is fastenedto the top of the
augerhousingwith a mountingclip, The tool is designed
to cleara chute assemblyof ice and snow,
This item is fastenedwith a cable tie at the factory,Cut
the cabletie beforeoperatingthe snowthrower,
,_ WARNING:
Never use your
hands to clear a clogged chute
assembly. Shut off engine and
remain behind handles until
all moving parts have stopped
before using the clean-out tool
to clear the chute assembly.
3