Programming Playback - Insignia NS-A2111 Guia Del Usuario

Welcome
To set the auto standby time:
1 Press CLOCK on the remote control, select S - - -, then input the
desired standby time. The longest standby time that the system
supports is 120 minutes.
For example, if you want to go into Standby mode after 30
minutes, enter 0, 3, 0. The system goes into Standby mode after
30 minutes.
Setting the auto-on time
You can set the time that the system automatically turns on.
To set the auto-on time:
1 Press CLOCK on the remote control, select O--:--, then enter the
time you want.
For example, if the current time is 11:30 a.m., and you want the
system to turn on at 10:30 p.m., press CLOCK again so pm
appears on the screen, then enter 1, 0, 3, 0. The system will turn
on at 10:30 p.m.
Note

Programming playback

To program playback:
1 If you are playing a DVD, press PROGRAM. The DVD program
playback screen opens.
Setting auto-on time makes the clock display time relative to
the current time.
www.insignia-products.com 19