Specifications - Insignia NS-A2111 Guia Del Usuario

Problem
The picture distorts or is out
of sync
No sound

Specifications

Disc type
Video format
Audio format
Signal output
Output joint
Audio joint
Power supply
Maximum power
Frequency power
Operating condition
Audio signal-to-noise
Note
28
Cause and solution
• When playing discs that are severely scratched or
have interior defects, or when the system is
affected by strong outer electromagnetic fields, this
problem occurs and normal operation of this
system is affected.
• Turn off the power for a while and turn it on again.
• Use a non-defective disc, and the system resumes
working normally.
• Unusually defective discs may shorten the service
life of this system.
Cancel mute mode or turn up the volume.
DVD, CD, CD-R, and MP3
MPEG 2 for DVD, MPEG 1 for VCD
MPEG 1, MPEG 2, PCM: STEREO
Video system: NTSC, PAL, AUTO
Video output: 1.0 V p-p
Simulated audio output: 2 CH 1-2V
RMS: 10W×2 + 25W×1
Component output, S-Video output, Video output, Stereo,
optical fiber, and coaxial digital audio output
Audio 1 and Audio 2
AC 110 V ±10% 60 Hz
120 W
+/- 3 dB (20 Hz-20 KHz)
Temperature: 41-95°F (5-35°C)
Operating status: Level
≥
80 dB weight A
These specifications are for reference only, and are subject
to change without prior notice.
www.insignia-products.com
Welcome