Reversing The Door Swing (Optional) - Maytag MDG25PN Instrucciones De Instalación

REVERSINGTHEDOORSWING
Door swing can be changed from a right-side opening to
left-side opening, if desired.
Place a towel or soft cloth on top of the dryer or work space
to avoid damaging the surface.
5. Rotate outer door 180 °.
2_
3.
Remove 3 of the 4 screws that hold the door hinge on the
front panel of the dryer. Partially loosen the remaining screw
with keyhole opening and lift the door off the screw.
\
Loosen
screw
with
keyhole
opening
A. Dryer front panel
B. Door assembly
Lay the door assembly on a previously prepared flat surface
with the inside (inner door assembly) facing up.
Remove the 6 Phillips-head screws to release the outer door
assembly from the inner door assembly, as indicated below.
See illustration. It is important that you remove only the 6
indicated screws.
4. Lift the inner door assembly off the outer door assembly.
2_
(J
Use a small flat-blade screwdriver to remove 2 plug strips
from the inner door. Slide the head of the screwdriver under
the plugs, being certain not to scratch the inner door surface.
Lift up.
Remove the 4 screws that attach to the inner door hinge
and move the hinge to the other side. Reinstall the 4 screws.
Door hinge
3. Reinstall plug strips on opposite side of the inner door.
4. Check for fingerprints on the glass. Clean glass if necessary.
11