Machinery Directive; Technical Specifications - entrematic Ditec PWR25H Manual Tecnico

2.1 Machinery Directive

Pursuant to the Machinery Directive (2006/42/EC), the installer who motorises a door or gate has
the same obligations as the manufacturer of machinery and as such must:
- prepare the technical data sheet which must contain the documents indicated in Annex V of the
Machinery Directive;
(The technical data sheet must be kept and placed at the disposal of competent national au-
thorities for at least ten years from the date of manufacture of the motorised door or gate);
- draw up the EC Declaration of Conformity in accordance with Annex II-A of the Machinery Directive
and deliver it to the customer;
- affix the EC marking on the motorised door or gate, in accordance with point 1.7.3 of Annex I of
the Machinery Directive;
3. Technical specifications
Tab. 3.0
Power
Maximum
power
Absorbed power
Maximum thrust
Maximum stroke
Opening time
Intermittence
Duration
Operating temperature
Degree of protection
Dimensions (mm)
Weight (Kg)
Graph 3.0
Usage limits
(gate wing weight and length)
WARNING: To prevent burglary, the use of an electric lock is recommended with wings longer
than 2.3m.
PWR25H
5A
55W nom. / 120W max
2000 N
350mm
10÷60 s/90°
80 cycles/day
30 consecutive cycles at 20°C
From 60,000 to 100,000 cycles based on
the conditions indicated in table 3.1 (see
the durability graphs of the product)
-20°C / +55°C (-35°C
IP44
820 x 100 x 107 h
7.8
PWR25H
800
700
600
500
400
300
200
100
0
0 1 2
24V
50 consecutive cycles at 20°C
From 120,000 to 300,000 cycles based on
the conditions indicated in table 3.1 (see
the durability graphs of the product)
+ 55°C with NIO active)
800
700
600
500
400
300
200
100
3 4 5
(m)
26
PWR35H
5.5A
65W nom. / 132W max
3000 N
450mm
14÷80 s/90°
150 cycles/day
IP44
970 x 100 x 107 h
9
PWR35H
0
0 1 2 3
(m)
4 5