Troubleshooting; Disposal - entrematic Ditec PWR25H Manual Tecnico

8 . Troubleshooting

Problem
The gate doesn't No power supply.
open or close.
Gearmotor released.
Photocells interrupted.
Permanent stop command.
Faulty selector.
Faulty remote control
Electric lock not working
The gate opens but Photocells interrupted.
doesn't close.

9 . Disposal

The packaging components (cardboard, plastic, etc.) should be disposed through the
separate collection for recycling. Before proceeding however, check the local regulations
regarding disposal.
The packaging materials should not be discarded in the environment or left within reach of
children, as they are a potential source of danger.
To dispose of electrical and electronic equipment, batteries and storage cells correctly,
users must take the product to special "recycling centres" provided by the municipal authorities
for disposal according to the methods envisaged by current legislation.
i
NB: for spare parts, see the spares price list.
Possible cause
38
Operation
Check that the mains power supply is
present.
See release instructions.
Check that the photocells are clean and
operating correctly.
Check the stop command or control
panel.
Check the selector or control panel.
Check the condition of the batteries.
Check the positioning and proper oper-
ation of the lock.
Check that the photocells are clean and
operating correctly.