Sharp PG-A10X Manual De Instrucciones página 53

If you want to change the keycode, follow
the procedure below.
Note
• When "Anti-Theft" is selected, the password in-
put box will appear. After the password has been
entered, you can change the keycode.
1
Press the buttons on the remote
control or the projector to enter the
preset 4-digit keycode in "Old
Code".
2
Press any button you like on the re-
mote control or the projector to en-
ter the new keycode.
3
Enter the same 4-digit keycode in
"Reconfirm".
Note
• If you do not want to set a keycode, leave the
keycode field blank in steps 2 and 3 and press
.
A10X_A10S#E_Print#p40_50.p65 49 03.2.4, 2:06 PM
49