IMS Welding POWERDUCTION 37LG Manual De Instrucciones página 23

Translation of the original instructions
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be followed
for your safety. Please read it carefully before using the device for the
first time and keep it in a safe place for future reference. Read and un-
derstand the following safety recommendations before using or servi-
cing the unit. Any change or servicing that is not specified in the instruc-
tion manual must not be undertaken. The manufacturer is not liable for
any injury or damage caused due to non-compliance with the instruc-
tions featured in this manual . If there is any issue or uncertainty, please
consult a qualified individual to operate the equipment correctly. This
machine may only be used to heat ferrous materials within the limits in-
dicated on the equipment and manual. The operator must observe the
safety precautions. In case of inedaquate or unsafe use, the manufactu-
rer cannot be held liable for damage or injury. Any other uses not spe-
cified in this manual is forbidden, and possibly dangerous.The product
is semi automatic and requires the presence of an operator.
This unit can be used by children aged 8 or over and by people with
reduced physical, sensory or mental capabilities or lack of experience
or knowledge, if they are properly monitored or if instructions for
using the equipment safely have been read and risks made aware of.
Children must not play with the product. Cleaning and maintenance
should not be performed by an unsupervised child.
Do not use the charger if the mains cable or plug is damaged.
Do not cover the device.
Fire and explosion risks!
• Do not use the device in an explosive atmosphere.
• Keep gas cannisters or other pressurised gas containers away
from the induction heating machine.
Warning, heat and flame risk.
• Do not overheat parts and adhesives.
• Be wary of fire, keep a fire extinguisher is in the vicinity..
• Do not position the machine on, or near flammable surfaces.
• Do not position the machine near flammable materials.
Warning ! Very hot surface. Risk of burns.
• The parts and pieces that have just been heated are hot and may
cause burns when manipulated.
• Do not touch any hot parts with your hands.
• Wait for the parts and pieces to cool down before handling them.
• Check that jewellery (such as wedding rings) or other metal pieces
do not get close to the induction heating machine or the inductor
when switched on.
• Remove any jewellery or any metal object from yourself before
using this machine
• People with metal implants should not use this machine.
• In case of burns, rinse with water abundantly and see a medical
doctor as soon as possible.
Dangerosity of the gas fumes
POWERDUCTION 37LG / 39LG / 50LG EN
23