IMS Welding POWERDUCTION 37LG Manual De Instrucciones página 32

Translation of the original instructions
• Never clean, lubricate or perform maintenance on the product when it's being used.
• Before any maintenance work, set the On / Off switch to « 0 » to switch off the machine, .then disconnect it it from
the mains power supply to prevent any electrical shock or other risks resulting from improper handling.
• Do not wear rings, watches, jewellery, hanging clothes (e.g. ties), torn clothes, scarves, unbuttoned or unzipped
jackets, or anyhting that could get caught during the operation of the machine
• Rather wear clothing specifically designed for the prevention of accidents, such as: non-slip shoes, anti-noise helmets,
protective goggles, safety shoes, etc ...
• Never use petrol or flammable solvents to clean the product. Prefer the use of water and, if necessary, non toxic com-
mercial solvents.
• After maintenance, always put and secure the metal covers back on, before switching the machine on.
• The ferrite on inducer can be replaced if damaged.
To replace it, you must :
- Remove the protection,
- Remove the ferrite on copper with a heat gun to facilitate the removal of the resin,
- Clean copper,
- Glue the ferrite with the specific resin,
- Reposition the ferrite with its protection,
- Waiting for the complete setting of the adhesive before using the inductor.
ACCESSORIES
Gallows - Cable carrier
OPTIONS
Ferrite
053823
053458
Glue Stick-Power Bi-component Epoxy 150 ° C
32
POWERDUCTION 37LG / 39LG / 50LG
39LG - 50LG
052284
39LG - 50LG
Protection
056909
056916
054851
Special welding liquid coolant
10 l
052246
37LG
Inductor
2 fixing brackets
(if choice trolley option)
37LG
UNIVERSAL 800 + Gallows
051331 + 052284
5 l
062511
EN