Setting Items - Canon PIXMA MX310 Guía De Iniciación Rápida

Setting on the Machine
This section describes the PictBridge print settings on the machine.
Set the print settings to Default on the PictBridge compliant device when you want to print
according to the settings on the machine.
Displaying the PictBridge Settings Screen and Specifying the Settings
1
Turn on the machine.
2
Press the Menu button repeatedly until DEVICE SETTINGS appears.
3
Press the [ or ] button to select PICTBRIDGE SET, then press the OK button.
4
Press the [ or ] button to specify the setting item, then press the OK button.
5
Repeat step 4 to specify each setting item as necessary.

Setting Items

Setting Item
PAGE SIZE
MEDIA TYPE
PRINT QLTY
BORDERLESS PRINT
IMAGE ENHANCEMENT Selects whether to optimize photos with
VIVID
POP
REMOVE NOISE
FACE BRIGHT
RED EYE CORR
* Set the items in this column to Default on the PictBridge compliant device when you want
to make settings on the machine.
24 Printing Photographs Directly from a Compliant Device
Description
Select the page size, when printing
directly from a PictBridge compliant
device.
Select the media type, when printing
directly from a PictBridge compliant
device.
Select the print quality, when printing
directly from a PictBridge compliant
device.
Select bordered or borderless print.
the functions below or not.
When SET is selected, you can
configure the following.
Makes green and blue more lively.
Automatically optimizes brightness and
tone of a photo.
Reduces the noise on blue areas like
the sky as well as on black areas.
Brightens a darkened face on the photo
taken against the light.
Corrects red eyes in portraits caused by
flash photography.
Corresponding
Setting of PictBridge
Compliant Devices*
Paper size
Paper type
–
Layout
Image optimize