How To Connect The Outputs Of The Controller - Agilent Technologies TV 801 Navigator Manual De Istrucciones

17 Technical Information
How to Connect the Open-Collector Inputs of the Controller

How to Connect the Outputs of the Controller

The following figure shows a typical logic output connection (relay
coil) but any other device may be connected e.g. a LED, a computer,
etc., and the related simplified circuit of the controller. The figure
example refers to the programmable set point signal on pins 11 and 9.
Figure 18
The following figure shows a typical output connection to a relay coil.
Figure 19
226/252
Typical output connection
Output to a relay coil
TV 801 Navigator User Manual / 87-900-953-01 (G)