How To Connect The Outputs Of The Controller - Agilent Technologies TPS-mini Serie Manual De Instrucciones

17 Technical Information
J1 – IN-OUT
Figure 30

How to Connect the Outputs of the Controller

The following figure shows a typical logic output connection (relay
coil) but any other device may be connected e.g. a LED, a computer,
etc., and the related simplified circuit of the controller. The figure
example refers to the programmable set point signal on
pins 11 and 9.
296/318
Case 2 with transistor utilisation
TPS-mini User Manual / 87-901-003-01 (E)